WARN M8000 WITH SYNTHETIC ROPE

COMPACT, TOUGH AND RELIABLE The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Available with your choice of 80' 3/8" Synthetic rope with Safety thimble or tube thimble with hook. Includes an Aluminum Hawse Fairlead. Pulls a fast 8 ft. per minute at rated load.

M8000 SPECS/PART NUMBERS Rated Line Pull: 8,000 lbs. (3630 kgs) single-line Intended Use: Vehicle Recovery / For Trucks and SUVs Motor: 12V 4.8 hp Duty Cycle Rating: Remote Control: Remote, 12' (3.7m) lead Geartrain: 3-Stage Planetary Gear Ratio: 216:1 Lubrication: Aeroshell #17 Clutch (freespooling): Sliding Ring Gear Brake: Automatic Direct Drive Cone Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) Weight: 74 lbs. (34 kgs.) Recommended Battery: 650 CCA minimum for winching Battery Leads: 2 gauge, 72" (1.83m) Finish: Argent Gray Powder Coat Nuts/Bolts: PN 39625

12V DC PERFORMANCE SPECS Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) Motor Current Pull by layer layer/Lbs(Kgs.) 0 42(12.8) 80 amps 1/8000(3629) 2000(910) 16(4.88) 200 amps 2/7280(3302) 4000(1810) 11.9(3.63) 285 amps 3/6670(3026) 6000(2720) 9.79(2.98) 350 amps 4/6230(2826) 8000(3630) 8.01(2.44) 435 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H. (534mm L. x 160m D. x 193mm H.) Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)