Winches & Winchlines

Toddco 3000 lbs. Suck Down winch with Aluminum Hawse Fairlead, remote switch, geard 136:1, 1.1 hp, loaded up with 5/16 x 12 ft. of Vicking Winch line.

Strength: Dyneema® synthetic winchline fiber is up to 15 times stronger than quality steel and 40% stronger than Aramid fibers on weight for weight basis. This means the replacement synthetic winchline is typically 35-45% stronger than steel cable! Steel cables are typically sized to match the strength of a winch. For example a 9,500 lb capacity winch will have roughly a 9,500-10,000 lb capacity steel cable. The replacement synthetic line would be 5/16" (7.9mm) or 3/8" (9.5mm). Our Viking Winchlines are rated at 12,300 lb (6 metric ton) for the 5/16" and 17,600 lb (8 metric ton) for 3/8", making them approximately 23% and 46% stronger on the conservative side. Call for the best price on these winchlines

The 250 series Hawse Fairlead coated with Type II black anodizing for superior wear and corrosion resistance. Stainless Steel Flat Head bolts are supplied for added corrosion resistance with stainless locking nuts.

COMPACT, TOUGH AND RELIABLE The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Available with your choice of 80' 3/8" Synthetic rope with Safety thimble or tube thimble with hook. Includes an Aluminum Hawse Fairlead. Pulls a fast 8 ft. per minute at rated load.

M8000 SPECS/PART NUMBERS Rated Line Pull: 8,000 lbs. (3630 kgs) single-line Intended Use: Vehicle Recovery / For Trucks and SUVs Motor: 12V 4.8 hp Duty Cycle Rating: Remote Control: Remote, 12' (3.7m) lead Geartrain: 3-Stage Planetary Gear Ratio: 216:1 Lubrication: Aeroshell #17 Clutch (freespooling): Sliding Ring Gear Brake: Automatic Direct Drive Cone Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) Weight: 74 lbs. (34 kgs.) Recommended Battery: 650 CCA minimum for winching Battery Leads: 2 gauge, 72" (1.83m) Finish: Argent Gray Powder Coat Nuts/Bolts: PN 39625

12V DC PERFORMANCE SPECS Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) Motor Current Pull by layer layer/Lbs(Kgs.) 0 42(12.8) 80 amps 1/8000(3629) 2000(910) 16(4.88) 200 amps 2/7280(3302) 4000(1810) 11.9(3.63) 285 amps 3/6670(3026) 6000(2720) 9.79(2.98) 350 amps 4/6230(2826) 8000(3630) 8.01(2.44) 435 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H. (534mm L. x 160m D. x 193mm H.) Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

Winch Accessory kit helps your winch get the job done right.

Part Number: WAR26502 Rated Line Pull: = 8000 lbs. Voltage: = 12V Motor: = 4.8 HP Remote Control: = Remote switch, 12 ft. lead Gear Ratio: = 216.1 Size: = 21.04 in. x 6.3 in. x 7.6 in. Weight: = 80 lbs. Wire Rope = 100 ft. of 5/16 Fairlead = Roller Type of Winch: = Electric This compact, robust unit is not only powerful, but it's an outstanding value. The M8000 has a powerful 4.8 hp. Series-Wound motor, 3-stage planetary geartrain, and can pull up to 8,000 lbs. - perfect for most trucks and SUVs, including Jeeps.

M8000 Specs/Part Numbers•Part Number: PN 26502 CE (12V DC) 100' wire rope and roller fairlead •Rated Line Pull: 8000 lbs. (3630 kgs.) single-line •Motor: 12V 4.8 hp Series WoundTM •Remote Control: Remote, 12' (3.7m) lead •Geartrain: 3-Stage Planetary •Gear Ratio: 216:1 •Lubrication: Aeroshell #17 •Clutch (freespooling): Sliding Ring Gear •Brake: Automatic Direct Drive Cone •Drum Diameter/Length: 2.5/9.0 (6.4cm/23cm) •Weight: 74 lbs. (34 kgs.) •Wire Rope: 100', 5/16 diam. (30m, 8mm diam.) •Fairlead for PN 26502: Roller •Recommended Battery: 650 CCA minimum for winching •Battery Leads: 2 gauge, 72 (1.83m) •Finish: Argent Gray Powder Coat •Nuts/Bolts: PN 39625

Part Number: WAR27550 Rated Line Pull: = 9000 lbs. Voltage: = 12V Motor: = 4.6 HP Remote Control: = Remote switch, 12 ft. lead Gear Ratio: = 156.1 Size: = 21.8 in. x 6.3 in. x 9.94 in. Weight: = 87.1 lbs. Wire Rope = 125 ft. of 5/16 Fairlead = Roller Type of Winch: = Electric As a long-time favorite, you'll see more of these winches mounted on vehicles than any other. Quick no-load line speeds, durable and reliable 3-stage planetary geartrains, and low current draw for long duty cycles have made these durable units staples of the WARN lineup for years.

The XD9000i features an integrated control pack and an all-metal housing for additional protection to the electrical components.

XD9000i Specs/Part Numbers•Part Number: PN 27550 CE (12V DC) •Rated Line Pull: 9000 lbs. (4080 kgs.) single-line •Motor: 12V 4.6 hp, 24V 2.5 hp, Series WoundTM •Remote Control: Remote, 12' (3.7m) lead •Geartrain: 3-Stage Planetary •Gear Ratio: 156:1 •Lubrication: Aeroshell #17 •Clutch (freespooling): Sliding Ring Gear •Brake: Automatic Direct Drive Cone •Drum Diameter/Length: 2.5/9.0 (6.4cm/23cm) •Weight: 85 lbs. (38.5 kgs.) •Wire Rope: 125', 5/16 diameter (38m, 8mm diameter) •Fairlead: Roller •Recommended Battery: 650 CCA minimum for winching •Battery Leads: 2 gauge, 72 (1.83m) •Finish: Argent Powder Coat •Nuts/Bolts: PN 39570

Part Number: WAR28500 Rated Line Pull: = 9000 lbs. Voltage: = 12V Motor: = 4.6 HP Remote Control: = Remote switch, 12 ft. lead Gear Ratio: = 156.1 Size: = 21.8 in. x 6.3 in. x 7.6 in. Weight: = 84.5 lbs. Wire Rope = 100 ft. of 5/16 Fairlead = Roller Type of Winch: = Electric As long-time favorites, you'll see more of these winches mounted on vehicles than any other. Quick no-load line speeds, durable and reliable 3-stage planetary geartrains, and low current draw for long duty cycles have made these durable units staples of the WARN lineup for years.

The XD9000 has a compact shape and separate control pack for easy and versatile mounting - even in tight spaces.

XD9000 Specs/Part Numbers•Part Numbers: PN 28500 CE (12V DC) •Rated Line Pull: 9000 lbs. (4080 kgs.) single-line •Motor: 12V 4.6 hp Series WoundTM •Remote Control: Remote, 12' (3.7m) lead •Geartrain: 3-Stage Planetary •Gear Ratio: 156:1 •Lubrication: Aeroshell #17 •Clutch (freespooling): Sliding Ring Gear •Brake: Automatic Direct Drive Cone •Drum Diameter/Length: 2.5/9.0 (6.4cm/23cm) •Weight: 78 lbs. (35 kgs.) •Wire Rope: 100', 5/16diameter (30m, 8mm diameter) •Fairlead: Roller •Recommended Battery: 650 CCA minimum for winching •Battery Leads: 2 gauge, 72 (1.83m) •Finish: Argent Powder Coat •Nuts/Bolts: PN 39625